Application version: 3.5.0.0
Estimated print time: 3h 16m
Material usage: 10.29m (24g)
Printer: Zortrax M200 Plus
Profile: Last settings
Support type: Automatic
Support: 30°
Material: ABS-based filament
Nozzle diameter: 0.4 mm
Layer: 0.20 mm
Quality: Default
Infill: 10%
Fan speed: Auto
Seam: Auto
Avoid overhangs: Yes
Outer contours: 0.00
Holes: 0.00
Inner contours Offset: 0.44
Surface layers Top: 7
Surface layers Bottom: 4
Support Lite: No
Smart bridges: Yes
Outer walls Number: 3
First layer Density: 100%
First layer Print speed: 100%
First layer Flow ratio: 100%
First layer Inner contours Offset: 0.44mm
First layer gap: 0.46 mm
Raft Enabled: Yes
Raft layers: 7
Platform-raft gap: 0.33 mm
Raft Density: 100%
Raft Print speed: 100%
Raft Flow ratio: 100%
Print speed: +0%
Extruder flow ratio: +0%
Top layer infill (%): 100
Bottom layer infill (%): 100
Extrusion temp.: 255
Platform temp.: 100
Retraction speed: 80
Retraction distance: 0.8
Support Density: 3.50 mm
Gap XY: 0.16
Cooling tower: No
Print too thin walls: No